Extender Bar Attachment

EXT-B2

The extender bar attachment is used to increase the length extension of the Alexander Universal Frames (except the Disc Raiser), Morris Settee and Morris Bed Raisers by 38cm. It is not compatible with: Morris Chair Raiser, Morris Recliner Raisers or the Alexander Disc Raiser.

The “golden rule” for furniture raising is to support all legs, feet or castors that were in contact with the floor before the furniture is raised. Because of this, a single base frame cannot raise a piece of furniture on its own; 2 frames and 4 suitable attachments would be required minimum but the total number may be larger depending on what arrangement the furniture has. The Furniture Disc Raiser allows this range of raisers to accommodate furniture with 5th/central legs. 

The raised furniture does not need to be re-positioned against a wall for support, which is an important safety consideration when choosing any furniture raising device. The furniture is capable of being repositioned around the room, for relocation or vacuuming purposes without fear of the raiser becoming dislodged.

This product is maintenance free and easily cleaned. Autoclave friendly and recyclable.

  • Maintenance free. 
  • Used in conjunction with Alexander Universal Raisers (except Disc Raiser), Morris Settee and Morris Bed Raisers.
  • Not suitable for Alexander Disc Raiser, Morris Chair Raiser or Morris Recliner Raisers.
  • Extends the length of a raiser by 38cm.
  • Manufactured from high grade, powder coated steel.
  • Easily attached and removed.
  • Colour: Black.

Attachments

Round Cup Attachment

Dimensions: 6cm Diameter (Internal)
Suitable for:
Castors up to 5cm
Round Legs up to 5cm Diameter
Square Legs up to 3.5cm

Square Cup Attachments

9cm Square Cup (AL08-3)
Dimensions: 9cm x 9cm (Internal)
Suitable for:
Twin-wheeled Castors 5cm – 8cm
Round Legs 5cm – 8cm Diameter
Square Legs 5cm – 8cm

11.5cm Square Cup (AL-08-4)
Dimensions: 11.5cm x 11.5cm (Internal)
Suitable for:
Round Legs 7cm – 10cm Diameter
Square Legs 7cm – 10cm

3-Sided Square Cup Attachments

9cm 3-Sided Square Cup (AL11-3)
Dimensions: 9cm x 9cm (Internal)
Suitable for:
Sweeping or Rectangular Legs where the standard square cup would not be suitable.

11.5cm 3-Sided Square Cup (AL11-3)
Dimensions: 11.5cm x 11.5cm (Internal)
Suitable for:
Sweeping or Rectangular Legs where the standard square cup would not be suitable.

The length of foot/leg must be aligned with direction of raiser.
*Cannot be used with Disc Raiser (AL-03) for both sizes.

Recliner & Riser Recliner Attachments

Recliner & Riser Recliner Attachment (AL-12)
Suitable for:
Recliner chairs or settees, where the feet are all fixed to the metal frame, minimum 14cm apart.

Twin Foot Support (AL-13)
Suitable for:
Recliner chairs or settees where pairs of feet are fixed to the metal frame, less than 14cm apart rectangular Legs up to 9cm (W) and 18cm (L)

*Both Attachments to only be used with MK2 Raiser (AL-01H).

Screw in Attachments

Flat Plate (AL-09 & AL09-LG)
Dimensions: 7.5cm x 7.5cm (Plate)
Suitable for:
Wooden legs, Square Round with a minimum width of 5cm.
L-Shaped with a minimum size 7.5cm x 7.5cm x 3cm thick.
Securing directly to wooden frame in place of feet.
A taller version (AL09-LG) is available offering 3 height raises of 13.5cm, 15cm & 17.5cm. 
Secured by screws (supplied).

Angle Bracket (AL-07)
Dimensions: 12cm (L) x 3.3cm (W) x 1.7cm (H) (Bracket)
Suitable for:
Wooden legs with a minimum length of 12cm and minimum width of 3cm.
Securing directly to wooden frame in place of feet.
Secured by min. 2 screws (supplied)

Divan Bed Attachments

Twin Cup (AL-06)
Dimensions: 6cm Diameter (Internal), Width Adj. 7cm – 14cm
Suitable for:
Castors either side of the divide on a split, double-divan bed.

Twin Cup Wide (AL-06W)
Dimensions: 6cm Diameter (Internal), 48cm wide gap.
Suitable for:
Castors either side of the divide on a split, double-divan bed.
Provides access under the central of the bed.

*Requires 2 Disc Raisers (AL-03)

Extender Bar Attachment

Extender Bar (EXT-B2)
Dimensions: 40cm Length, 38cm increase to raiser.
Suitable for:
Linked Raisers (AL-01, AL-01H, AL-02, AL-04, AL-05, SET-32, BR-B, BR-A2, CR-C3S)

*Not suitable for raisers (CR-C2, CR-C3, AL-03)

Types of Base Frames

Alexander Universal Raiser MK1 (AL-01 & AL-02)

Alexander Universal Raiser MK1 (AL-01)
Length Adjustment 43cm to 84cm
Height adjustment: 8.5cm to 12.5cm
Suitable for:
Chairs & Settees
(not recliner or riser recliner furniture).

Alexander Universal Raiser MK1 (AL-01)
As above, but includes 2 x Round Cup Attachments (AL-10) per frame.

Alexander Universal Raiser MK2 (AL-01H)

Alexander Universal Raiser MK1 (AL-01)
Length Adjustment 43cm to 84cm
Height adjustment: 8.5cm to 12.5cm
Suitable for:
Chairs, Settees, Recliner Chairs & Settees, Riser Recliner Chairs 
.

Alexander Universal Disc Raiser (AL-03)

Disc size: 20cm Diameter.
Height adjustment: 8.5cm to 12.5cm
Suitable for:
Chairs, Settees, Corner Units or Beds with central/5th legs, or where linked raisers are not practical (not recliner or riser recliner furniture).
Excellent synergy with the Twin cup attachments (AL-06).

Alexander Universal Bed Raiser (AL-04 & AL-05)

Alexander Universal Raiser MK1 (AL-01)
Length Adjustment 74cm to 147cm
Height adjustment: 8.5cm to 12.5cm
Suitable for:
Beds (Single to King Size) and wider with the Extender Bar Attachment (EXT-B2)
.

Alexander Universal Bed Raiser (AL-05)
As above, but includes 2 x Round Cup Attachments (AL-10) per frame.

Scroll to Top